Prepare. Protect. Preserve.
Surface Preparation & Protective Care
Primers, bonding agents, base coats, sealers, waxes, and maintenance products for reliable application and long-lasting decorative finishes.
Key preparation and protective-care products
Find the compatible primers, adhesion layers, sealers, waxes, and maintenance products needed to prepare substrates and protect finished surfaces.
8 products
Acquadivetro
Acquadivetro is a clear water-based protective treatment for mineral facades, formulated with siloxane resins and special additives. Protection and strengthening of mineral facades, such as reinforced concrete, lime-based paints and plasters, siloxane paints and plasters. In addition, Acquadivetro is an excellent protective treatment for lime putty finishes and natural stone. Yield: 7-20 m2/l for each layer.
From $110.00 CAD
Cera Wax
Cera-Wax is a decorative finish formulated with polyethylene waxes, special metallic pigments and rheological modifiers, that permit to achieve an easy-to-apply material. Its special formulation guarantees high level of brightness, several pearly shades and a soft water protection. Cera Wax Plus, Gold, Silver, Bronze, Barocco Gold, Madreperla, GoldMica, give to the surface also an additional decorative element Yield: 15-20 m2/l for each layer.
From $110.00 CAD
Clear Coat
Water-based washable protective coat for interiors, based on acrylic resins. Protection of interior walls finished with acrylic decorative paints by Novacolor. Clear Coat increases the wash-ability and protection of the substrate. Yield: 5-10 m2/l for each layer.
From $100.00 CAD
Clear Finish Monocomponent
Clear Finish Monocomponent is a polyurethane water-based protection to be used as a protective coat for vertical, interiors and exteriors surfaces, treated with decorative finishes, water-based paints and enamels. Its non-yellowning formulation provide to the thin film a very high water and stains resistance. Clear Finish Monocomponent permits to achieve a good resistance to abrasion and high durability. Yield: 12-14 m2/l for each layer.
From $160.00 CAD
Decofix
Decofix is a water-based solvent-free insulating product with high penetration performances. Due to its special formulation, Decofix is highly suitable for the impregnation and consolidation of interior and exterior surfaces. Formulated with polymers with very fine particles, Decofix ensures an high penetrating performance able to consolidate chalky walls surfaces covered with several layers of old paint.Due to its performances and considering its extremely low VOC emission, Decofix is a valid alternative solution to traditional solvent-base sealers. Isolating the surface, Decofix improves the cohesion and make uniform the absorption of the surface creating a perfect anchor for the subsequent layers of paint. Yield: 8-18 m2/l for each layer.
From $150.00 CAD
Fase Silossanica
Fase Silossanica is a transparent vehicle made of acrylic and styrene copolymers, siloxane resins and special additives. The particular formulation of Fase Silossanica allows the application on multiple supports, such as synthetic, mineral and siloxane surfaces for interior and exterior velaturas. It allows to achieve vibrant transparent chromatic effects, with the possibility to obtain different nuances and shades depending on the colours and on the application technique. Decoration of classical and modern interiors. Special finishing coat for exterior facades in historical town and country areas, in respect of the historical heritage. Finishing coat for synthetic facades, where highly prestigious aesthetic effects are required. Yield: 12-15 m2/l for each layer. Dillution: Maximum dilution rate 100% with water
From $110.00 CAD
Novaprimer
Novaprimer is a water-based acrylic sealer which ensure insulating performances even if in contact with highly alkalinity plaster coatings. Novaprimer represents the expression of Novacolor commitment to the environmental sustainability. To reduce the "carbon footprint", Novaprimer is formulated with a special binder, made from sustainable biomass, that replaces the fossil raw materials. This is possible thanks to a technical-productive system called “mass balance approach” certified REDcert². YIELD 8-10 m2/l, per coat, depending on the kind of substrate and its absorption rate. It is advisable to determine the real yield with a preliminary test on the specific substrate.
From $50.00 CAD
Patina Minerale / Antiche Patine
Patina Minerale is a transparent vehicle, with colloidal silica base, appropriately modified with organic binders and special water-repellents. Patina Minerale is ideal on mineral substrates such as CalceCruda. The chromatic effect resembles the antique colour washes typical of the mineral systems, with the possibility of obtaining tones and shades of colour on the basis of the techniques and the colours applied. The particular formulation of Patina Minerale allows high vapour permeability to be obtained, associated with good resistance to UV rays and atmospheric agents. Patina Minerale represents the expression of Novacolor “Green Approach”. To reduce the "carbon footprint", Patina Minerale is formulated with aspecial binder. Based on a "mass balance approach" fossil raw materials in production are replaced with sustainable biomass. Patina Minerale represents the expression of Novacolor commitment to the environmental sustainability. To reduce the "carbon footprint", Patina Minerale is formulated with a special binder, made from sustainable biomass, that replaces the fossil raw materials. This is possible thanks to a technical-productive system called “mass balance approach” certified REDcert². Yield: 4-8 m2/l in two layers
From $120.00 CAD