Uninterrupted surfaces
Seamless Flooring
Continuous floor and wall systems developed for calm, jointless interiors with durable architectural performance.
Key Wall2Floor and seamless flooring products
Build a complete Novacolor Wall2Floor specification from the available preparation, levelling, decorative top-coat, primer, and protective components below.
10 products
Athena
Wall2Floor Athena is made of acrylic water-based polymers and selected additives which gives to the product an excellent adherence on smooth surfaces such as tiles, grès, mosaics or similar. Yield: 15-20 m2/l for each layer.
From $100.00 CAD
Clear Finish Bi-Component A+B 3.25 L
Clear Finish Bi-Component is a polyurethane water based resin to be used as a protective coat. Protection of vertical and horizontal surfaces of Wall2Floor system. Yield: 6-7 m2/l in two layers.
From $420.00 CAD
Clear Finish Countertop Protection A+B 3.25 L
Clear Finish Countertop Protection is a water-.based bi-component protection coat for interiors, with high performances. Clear Finish Countertop Protection is suitable for the protection of various horizontal surfaces, such as kitchens countertops or bathrooms, decorated with Wall2Floor Top Coat. Thanks to the synergy of the chemical properties of acrylic and polyurethane non-yellowing aliphatic polymers, associated with special fillers, it allows to obtain finishes with excellent resistance to wear and to the daily cleaning up operations. Clear Finish Countertop Protection (available as glossy and ultra matt) has a good resistance to cold liquids and heat resulting from contact with hot cups, but it is not recommended any contact, even for a short period, with hot-pots. It is not resistant to falls of heavy objects. Due to its specific properties, Clear Finish Countertop Protection can be used as the finishing coat for floors in some of the possible applications of Wall2Floor systems. Yield: 5-7 m2/l in two layers.
From $220.00 CAD
Epoxy Binder A+B 2.4 L
Wall2Floor Epoxy Binder is a bi-component epoxy binder. Wall2Floor Epoxy Binder mixed with Wall2Floor Rasal allows the creation of an epoxy-cement, tri-component levelling agent, specific for the “Wall2Floor System”. Yield: Wall2Floor Epoxy Binder + Wall2Floor Rasal: 3 kg/m2 in two layers
From $200.00 CAD
Mineral Sealer A+B 0.85L
is a new-generation, two-component epoxy primer with low volatile organic compound (VOC) emissions and low formaldehyde emissions. It can be diluted with water, has low viscosity, and features high penetration power, specifically designed for interior mineral finishes on both vertical and horizontal surfaces. Mineral Sealer does not alter the colors of decorative finishes and preserves the original plaster effect. It can be used as a sealing layer in Wall2Floor systems when combined with Wall2Floor Top Coat Fine and Waterproof. Mineral Sealer consolidates the mineral surface and optimizes the technical performance of applying the clear topcoat during both the application phase and the subsequent curing process. Yield: 4-8 m2/l for each layer on irregular substrates; 8-12 m2/l for each layer on smooth substrates.
From $160.00 CAD
Primer A+B 0.75 L
Wall2Floor Primer is an epoxy bi-component primer, epoxy resin-based, with high penetrating powers specific for the “Wall2Floor System”.Wall2Floor Primer reinforces the mineral surface of the Wall2Floor Top Coat and optimizes the product performances of the Wall2Floor Clear Finish during the application and hardening phases. Yield: 16-21 m2/l for each layer.
From $140.00 CAD
Rasal
Wall2Floor Rasal is a cement putty made of highly selected natural sand, binding agents and special additives for a perfect adherence with the substrate and a perfect workability.Smoothing product for horizontal and vertical surfaces. After treating the surface with a suitable specific adhesion product (please look at the “Wall2Floor System” TDS), restoring degraded screed, floors and pre-existing ceramic and tiled surfaces. Yield: 1,5-2,5 kg/m2 for two layers.
From $250.00 CAD
Rete (Mesh)
Fiber glass mesh with anti-alkali treatment. Rolls of 55 m2
From $210.00 CAD
Top Coat A+B
Wall2Floor Top Coat is a mineral plaster coat (micro-cement) for the decoration of horizontal and vertical surfaces in prestigious places.Decoration of highly valuable interiors in compliance with current trends in fashion and architecture. Yield: 1,2-1,5 kg/m2 for two layers.
From $70.00 CAD
Top Coat Waterproof A+B
Wall2Floor Top Coat Waterproof (micro-cement) is a two-component epoxy coating in paste form, for interior use, trowelable, for horizontal and vertical applications, particularly suitable for humid environments or those repeatedly in contact with water. Thanks to its special formulation, it provides a seamless, continuous surface with high resistance to wear. If there are scratches in the paint, when colour changes are noticeable the product does not absorb and show any water passages. Yield: 0,8-1,1 kg/m2 in two layers.
From $75.00 CAD